How to effectively extend the service life of high and low temperature test chamber compressors
The compressor is the core component of the high and low temperature test chamber and plays a direct role in the high and low temperature test. Therefore, the maintenance of the compressor is very important. Based on the experience of Xiaobian for many years in the ring test industry, the following maintenance recommendations are summarized: Shaoxing Lenore Textile Co.,Ltd , https://www.lenoretex.com
1. Do not start the compressor frequently during the test, and the interval between compressor start-up should be more than 15 minutes;
2. The voltage in the workplace must be stable. If the voltage is unstable, the current will be too large or too small. If it is operated in this environment for a long time, it will cause great damage to the compressor. It is recommended to use a voltage regulator to connect the high and low temperature. Test box
3. Ensure that the working environment is well ventilated and free of dust, and keep the surface of the compressor clean. If the high and low temperature test chambers are not used for a long time, the equipment should be placed in a space that is as dust-free as possible;
4, high and low temperature test chamber should be placed in the environment that meets the requirements: temperature: 5 ° C ~ 30 ° C, humidity: ≤ 85% RH, air pressure: 86 ~ 106kpa;
5. There is proper maintenance space around the equipment, no strong electromagnetic radiation source nearby, smooth ground, good ventilation, and no flammable, explosive and corrosive gases.
If you do the above, you will basically master the maintenance of the compressor. It can ensure the normal equipment operation of the high and low temperature test chamber and effectively extend the service life of the equipment.