Clothing with a single qc workflow and expertise
The collar is larger than the collar. fashion creative Brown beer bottle, Colors, non-slip, a wide range of uses, bottle mouth transparent and smooth, round cup mouth design, cup body is irregular cylindrical, smooth lines, even texture, crystal clear, concise design, simple and dignifiedfashion simple, Brown lead-free glass, thickened glass material, non-toxic lead-free glass products, health and safety, safe use of bottle bottom thickening anti-skid texture design, manual high-temperature sintering, bottle thickness high-temperature resin. Brown Wine Bottles,Fancy Brown Wine Bottles,Colored Wine Bottles,Brown Glass Wine Bottles Xuzhou Dingshun Glass Products Co., Ltd. , http://www.dingshunglass.com
48: What is the general order of QC inspection?
From top to bottom, from front to back, check the quality after measuring the size.
49: How much does it take for a general knot? What is the general treatment?
1-1.5CM, generally knotted to prevent loose knots 50: Generally, several sets of fabrics and accessories cards need to be made when mass production of large goods. What departments are these cards generally in? What should I pay attention to when making fabric and accessory cards?
At least three sets of fabrics and accessories cards for large-scale production should be made, such as ones for singles , QCs, and factories. When making fabrics and accessories cards, be careful not to mislabel the bottom surface. After fabrics and accessories cards are finished, they should be covered on the surface. Confirm the chapter to prevent mistakes in production.
51: mass production, with the single need to provide any information to the factory?
Detailed production orders, including detailed drawings, packaging methods, washing methods, uniform size tables, confirmation office and process requirements materials, pre-production confirmation office, and surface accessories cards.
52: What are the specifications for the finished product inspection?
Finished product inspection will generally be conducted according to different sizes, different box numbers and different colors.
53: What kind of quality can you be in general (unacceptable)?
All the defects that affect the quality and appearance of the garment are unacceptable.
54: What is the distance between the double-line and the third-line?
The distance between the bright lines is 0.1CM, the distance between the two lines is 1/4 inches, and the distance between the three lines is 1/8 inch between the lines. 55: What is the loss of auxiliary materials supplied to the factory during mass production?
The general loss of export is 3%~5%. If it is the main selling, hanging tag and price card of domestic sales, it will not give loss, only the defective product will be exchanged.
56: What is the difference between the quality inspection of domestic and foreign clothing, and what is the difference in sampling rate?
The domestic sales of clothing are generally small in size, especially the quality requirements of the brand's clothing are relatively high, most of the domestic clothing is checked by 100%; the export of clothing is generally larger, most of which are regulated according to AQL4.0 Spot check.
57: What are the qualities of fabrics? What kind of fabric needs to be returned?
The quality of the fabric generally includes, the cloth seal, the color, the hand feeling (texture); the color difference, the side difference, the step difference, the door width does not match, and the shrinkage rate is too large to request the fabric to be retracted.
58: Button 1 Luo = 144 tablets Zhang Gen 1 Luo = 3 volumes = 144 yards 1 volume = 48 yards 59: Washed clothing into clothing, if you check the size, generally have to be divided into several sizes?
The size before washing, the size after washing 60: If the fabric or lining large goods need machine cotton, what is the difference between the amount of materials used and the amount of cotton that is not needed?
For fabrics that require inter-machine cotton, the loss and shrinkage of the inter-machine cotton must be added to the original fabric. The fabric of the inter-machine cotton is generally 2% more than the fabric without the inter-machine cotton.
61: If the garment needs to be washed, can you wash the fabric first when doing the code-hopping or large-scale operation? What should I do?
It is impossible to wash the fabric first in the code-hopping process, because the pattern will have to use the non-shrinking version. When doing the code-hopping, you must use the same washing method as the bulk cargo to test the shrinkage. Washing water like the large-scale garments is convenient for washing to determine the size of the garments and the washing effect of the large goods.
62: What is the price unit of woven fabric, knitted fabric and leather?
Woven fabrics are generally in yards or meters. Knitted fabrics are generally in pounds or kilograms, and skins are generally measured in square meters or square feet.
63: What is the difference between the front pockets of jeans and trousers?
The bottom of the jeans is usually made of light, while the trousers of the trousers generally have more rolling strips.
64: What is the stitch length of a 1 inch denim garment? How many stitches is the 1 inch stitch length of the thin fabric?
Generally, the pitch of a 1 inch denim garment is 8-9 needles, and the stitch length of a 1 inch fabric is 11-13 needles. 65: What is the weight of the liner of a general down jacket?
Generally, the inner liner of the down jacket is double-breasted (anti-escape), because it can effectively prevent the down from seeping through the pinhole.
66: What is the size of the men's shirt size? What parts of W and L in the size of the trousers generally represent?
Men's shirts on the size of the plaque will generally have a collar, size, size; W in the size of the trousers refers to the waist, L refers to the length of the length 67: Washing clothes generally check the effect of clothing?
Washing clothes generally check the garment effect after washing the clothes, mainly the color after washing and the grinding degree of the bone position 68: What direction of the fabric is represented by the warp and weft directions?
The warp direction represents the horizontal direction of the fabric, and the weft direction represents the longitudinal direction of the fabric, that is, the width of the cloth. 69: What type of clothing is the type and number of the clothing in the top and bottom?
The type of clothing represents the bust in the top, and the waist in the bottom; the number represents the height 70: What parts of the jeans will have nails and dates, what is the role?
In general, the front and front pockets will have rivets, back pockets and sills, inner waves and ears, and there will be jujubes in the ears. There is no need to make dates when there are rams. The role. The rivet can also be used as a starting point.
71: What should I do with cotton rope, webbing and roots before sewing?
Make a shrinkage treatment, use steamed or blistered, and dry.
72: What should the production department pay attention to when making garments that produce white fabrics? What measures should I take?
When making white net fabrics, because the clothing is poorly resistant to dirt, pay attention to the cleanness of the equipment and do not use colored pens.
73: If there are three colors, white, red, black flannel fabric, can you pull together when the cloth is pulled? why?
No, because flannel fabric is easy to hair loss, Raab together during cutting of the fabric, the fabric will be dyed black powder onto white fabric 74: Washed clothes, what kind of washing to do with a single to give the factory?
Any clothing that washes water, the order must be a set of correct pants wash water to the factory as a large cargo wash water for reference.
75: What is the upper collar of the general shirt than the lower collar (the height of the collar)?
Because the superiors of the ready-to-wear collars have to cover the lower-level collars, the upper-level collars are generally larger than the lower-level collars by 1-1.25CM.
76: Men's shirts If the left front barrel is 1.5 inches, how much bright line should the right front panel press?
The pressure line on the right front panel is 1/2 inch smaller than the face tube, which is 1 inch wide.
77: What should be paid attention to in the production of coated fabrics?
Since the coated fabric is easily stained with dust, it should be dust-proof when it is produced.
78: If there is no lower collar shirt, what is the first button? 1 inch and 3/4 inch buttons, where is the phoenix eye open in the front (side)?
There is no shirt for the lower collar, and the first button is usually 1/2 inch below the collar. 1 inch button, the wind eye should be opened 5/8 inches from the front, 3/4 inch button, the eye should be opened at 1/2 position from the front, the button is usually worn on the buckle The front is about 1/8-1/4 inch, and the button will be lifted from the front and the front.
What is the actual diameter of the 79:16L 20L 24L 32L 39L button?
16L=10mm 20L =12.5mm 24L =15mm 32L =20mm 39L=24.6mm
80: When counting the number of clothing accessories, such as hoes, hangtags, buttons, and plastic needles, what method can be used to calculate the quantity quickly and accurately?
If the above-mentioned excipients are in mass production, if you use one by one for each excipient, it will be a waste of time. In fact, when you count these excipients, you can use the balance to call it, that is, each excipient. Take 20-50, weigh the total weight with the balance, then calculate the average weight of each, and then multiply the required quantity to get the total weight, which can be more accurate and faster.