Why does Pyle ERP glass CAD bring huge benefits to glass processing?
Gold Color Necklace,Rhodium Color Necklace,Silver Color Necklace Disha Jewelry Co., Ltd. , http://www.zjbodyjewelry.com (not manually entered)
The glass CAD in Pyle ERP is getting better and better, and gradually solves the problems of importing AutoCAD, setting the amount of irregular grinding, etc. It is time for more companies to benefit from it.
What can be achieved with glass CAD? (global original)
1. Clearly print to various types of documents, and scale the graphics according to the size of the print area without distortion
2. The shop floor system can view detailed big pictures and support zoom operations.
3. Drawing (or importing) at the same time, supporting support for workers, and supporting processing equipment, greatly improving production efficiency
Comparison of glass CAD and other methods:
Table 1 Comparison of Pyle Glass CAD and Bitmap Methods
Comparison project
Pyle Glass CAD
bitmap
Zoom
It can be freely scaled according to the print area. Set the appropriate print area according to the complexity of the graphics
Distorted as soon as scaling is done (very ambiguous)
Merge print
Depending on the paper size and the size of the graphic print area, multiple graphic merge prints can be achieved, saving paper
can not achieve
Device driver
Can drive glass cutters, punchers, etc.
can not achieve
Dimensioning
Very intuitive, standard dimensioning
Cannot be implemented unless it is fetched directly from CAD
Gallery
Really parameterize the gallery, after entering the parameters, the graph automatically changes according to the size
Fixed size gallery can be achieved
* bitmap mode, refers to the picture mode, such as drawing board, etc.
Table 2 Comparison of Pyle Glass CAD Method and Foreign Optimization Software Graphics
Comparison project
Pyle Glass CAD
Foreign optimization software graphics
Gallery
Parameterized library
Parameterized library
Dimensioning
Very intuitive, standard dimensioning
no
Hole, missing, silk screen, 3C mark, logo, etc.
Complete processing information
Just cut frame information
Device driver
Can drive glass cutters, punchers, etc.
Cutting machine only
Cutting machine cutting punching position
intelligent
no
Abrasion amount
Automatic placement
Manual calculation
CAD import
DWG, DXF any version of the file
DXF specific version of the file
*Foreign optimization software is a cutting frame; and Pyle glass ERP can express all processing information of this glass in addition to the cutting frame.
The following is an example of a specific glass, the advantages of using Pyle glass ERP built-in glass CAD:
Table 3 example diagram
Step by step : Draw or import from AutoCAD DWG or DXF and set processing information. For related operations, see:
Step 2 : After joining the system, the finished product size is automatically calculated, as shown below:
Form 4 automatically obtains the finished size
The third step : nesting
1) If you wish to cut the position of the hole while cutting, then:
Table 5 Cutting Settings Punch Parameters
How much hole diameter is supported, depending on the specifics of your cutting machine. After setting, the loaded cut chart is as follows:
Table 6 Cutting frame and punching position
Note: Holes with a diameter of 12mm are automatically drawn as X
2) If you need to sharpen the edge, add the amount of the grinding edge and set it after the input. (If the amount of edging is small, you can see it in the upper right corner.)
Table 7 Finished and cut frames after grinding
3) In order to facilitate the cymbal, add the cutting guide line, and the result is as follows:
Table 8 Adding cutting guides
Purple is the added cutting guide
4) Optimization, the layout is as follows:
Form 9 Nesting Chart
5) Output to the cutting machine
Table 10 Intermac cutting machine display interface
Table 11 BOTTERO cutting machine
Table 12 Hailining Orchestration Software
The fourth step : sub-task, split, etc., print the process card:
Table 13 Process Card Printing Example (focus on automatic graphic merge printing)
Step 5 : Workshop operation system (workers can view the details of the drawings in detail according to their own processing needs)
Table 14 Shop Floor System (automatically generate thumbnails and support any magnification operation)