What kind of clothes do you wear in spring?
Spring temperatures have been erratic, high and low so that beauty of the beauty of some people overwhelmed. However, if you want to have a relatively stable fashion living space, then quickly into the Cavenon store. Here you will find a lot of new clothes suitable for wear in early spring. If you are afraid of cold, it is best to wear a knitted jacket. This knit deep V-neck sweater, ride inside the orange shirt shirt dress, is not it ok? In the waist with a wide belt waist and knitted jacket with a clear color contrast, more highlights your fashion beauty. Of course, in the spring if you choose a woolen jacket is also very good. Like this hooded design jacket, to catch a basement and a cotton fabric scarf, is not a virgin flavor of the wind? If you prefer this style of women's clothing Cavena women , it can now go into Karen clothing store to buy early spring new clothes. Here, you will have more suitable for your wear spring clothing. Of course, if you want to join, you can contact Lee International (13420937113). It is used to bolt thin sheet metal parts to larger, often billet or forged, parts. The barrel nut is a round slug, or formed sheet metal part with threads perpendicular to the length of the nut. The nut sits in a hole inside the forging and a standard bolt is threaded into the barrel nut from outside the sheet metal. They are preferred over a standard nut and bolt, because they do not require a flange to be machined or forged onto the receiving part, thus reducing weight. dowel nut, barrel nut, cross dowel nut FinExpress Precision Manufacturing(Dongguan) Co., Ltd , https://www.finexpresshardware.com
Furniture cross dowel barrel Nuts are cylindrical shaped metal nuts (metal dowels) used with furniture connector Bolts to join two pieces of wood. The inside threaded hole is unusual in that it passes through the sides of the dowel. To install, the pieces of wood to be joined are aligned, then a bolt hole is drilled through one piece of wood and into the other. A dowel hole is drilled laterally across the bolt hole and the cross dowel is inserted into it. The end of the cross dowel is slotted so that a screwdriver can be inserted to rotate the dowel so that its threaded shaft aligns with the bolt hole. The furniture connector bolt is then inserted into the bolt hole and screwed into the cross dowel until the wood pieces are held tightly together.