Plastic steel door and window installation skills
[China Glass Net] Plastic steel doors and windows are products purchased by many home improvement personnel. In particular, the current environmental awareness is deeply rooted in people's hearts. Plastic steel doors and windows are deeply loved by everyone. But after purchasing, many people don't know how to install it. Office workers looking for a master to decorate and have no time, it is better to do it yourself. How to install the plastic steel window? Voile Curtains,Tulle Voile Curtains,Embroidery Sheer Curtain,Classical Embroidery Curtain SHAOXING NINGBO DECORATTION FABRIC FACTORY , https://www.curtaincushion.com
Plastic steel door and window installation skills
First, preparations:
1. The plastic steel window enters the site according to the requirements of the contract to check the quantity, variety, specifications, opening direction, shape and hardware, sealing strips and fasteners, etc., if they are not qualified, they should be replaced and adjusted.
When the plastic steel window enters the site, the protective film and paint should be inspected. If the protective film falls off, the protective film should be subsidized, and the center line should be drawn on the upper and lower sides of the window frame. If the glass is already installed on the window, the glass should be removed and marked.
2. The window should be kept clean, erected, firmly fixed, and protected from vibration. The non-metallic soft material should be separated between the concrete and the concrete. The metal fittings should also be staggered to avoid wear and tear.
3. Check the installation of the hole before installing the plastic-steel window. It must be ensured that the wet work of the wall is completed and hardened. Protective measures should be taken when it is required to be carried out before wet work.
4, door and window installation project at the end of the plastic steel window installation project related materials, equipment preparation, quality requirements and construction process vertical and diagonal, after passing the expansion bolts to firmly secure the iron feet and structure.
Second, caulking:
The gap between the door and window frame and the wall is filled with styrofoam, and the surface is sealed with a sealant with a thickness of 5 to 8 mm.
Plastic steel window installation door and window frame side is not embedded with sealant: should be operated according to the drawings. Connect the screw directly into the window frame of the entry window: do not press the hand drill with the eye, and then screw the screw.
Third, small hardware installation:
When installing, first drill with electric drill, then use self-tapping screws to screw in. Do not hit with a hammer or hard object to prevent damage to the frame material.
Fourth, finished product protection
After installation, pay attention to the finished product protection, anti-pollution, anti-electric welding spark burn, damage the surface layer.
No pollution: protection measures are not enough, cleaning is not serious.
5. Damage to gold fittings : Due to improper storage after installation, do not pay attention when using.
It seems that it is very simple. But you can't be too small. You must pay attention to the details when installing. At the same time, everything should be based on safety. You can also become a half master according to the above steps.