Experience in the decoration of doors and windows
[China Glass Net] Door and window decoration belongs to a large decoration project, which involves a lot of learning. If the construction personnel are not careful, the door and window decoration will be distorted, and it will be deformed in the future to produce a series of problems. How to avoid these problems? And how to supervise the construction staff to complete the door and window decoration, this requires a certain common sense. Synthetic Woven Fabric,Woven Synthetic Fibers,Yarn Dyed Woven Fabric,Non Woven Synthetic Fabric Shaoxing JingXuan Textile Co.,Ltd. , https://www.jxfabric.com
It is better to replace the doors and windows before the window is removed. Because the window removal process will destroy the indoor and outdoor walls, it is better to replace the doors and windows before proceeding with the next step. It is recommended that high-quality brand doors and windows should be used when decorating doors and windows, because the quality of the door and window profiles will determine the grade, sealing and anti-aging properties of the entire door and window.
Second, the selection of doors and windows with good precision and strength is recommended to go to the formal building materials market, especially some inferior plastic doors and windows, the quality of the inner lining steel is not good, even without the lining steel, other accessories are also very poor.
Third, why the doors and windows will turn yellow. The appearance of plastic doors and windows is too white or gray, indicating that the stable components in the material are not enough, and it is easy to age and turn yellow.
Fourth, check whether the hardware is flexible and smooth. There should be aluminum slide rails in the lower part of the sliding window frame to facilitate replacement. There should be fixing pieces in the middle of the sealing top of the window sash, which is the key to the sealing performance of the sliding window.
Fifth, the door and window installation window frame and the wall should be filled with styrofoam, and the inside and outside of the window frame must be sealed with silicon copper glue or sealant to prevent water seepage. Remember, after installation, the user should remove the protective film, which can extend the life of the door and window.